


What is a butterfly valve – and when is it the right choice?
A butterfly valve opens and closes a pipeline cross-section through a 90° rotation of a centric or eccentric disc. The disc remains in the flow path when open — pressure drop is low but present. Installation options are wafer type (no integral flanges, held by through-bolts between two pipe flanges) or lug type (threaded inserts in the body, usable as a dead-end valve). Both types conform to DIN EN 593 and EN 558-1 Series 20 for face-to-face length. From DN80–DN100 upward, butterfly valves outperform ball valves on price, weight and space — making them the preferred shut-off valve in water, HVAC and industrial pipelines at larger nominal sizes.
Centric or double-eccentric – which design is right?
| Feature | Centric Butterfly Valve | Double-Eccentric Butterfly Valve |
|---|---|---|
| Pressure rating | PN6 / PN10 / PN16 / ANSI 150 | PN16 to PN40 (metal-seated) |
| Seat material | EPDM, NBR, FKM, PTFE | RPTFE, INCONEL 718 |
| Temperature | up to +180 °C (FKM) | up to +360 °C (INCONEL 718) |
| Leakage class | Class IV–V (EN 12266) | Class VI / Rate A (ISO 5208) |
| ATEX / TA-Luft | No (standard) | Yes – ATEX II 2GDc, ISO 15848-1 |
| Nominal size | DN25–DN1200 | DN50–DN600 |
| Typical applications | Water, HVAC, general industry | Chemicals, steam, oil/gas, Ex-zones |
For standard water and air service at PN6–PN16, the centric butterfly valve is the cost-effective choice. For aggressive media, high pressure and plants with ATEX or TA-Luft requirements, the double-eccentric butterfly valve is the appropriate solution.
Housing materials & seat rings – matching material to medium
GGG40 + 150 µm epoxy coating is the standard housing material for water, air and neutral media at PN6–PN16. Stainless steel 1.4408 (CF8M) is specified for corrosive media, food-grade applications and elevated hygiene requirements — available as a stainless steel butterfly valve. For aggressive acids, alkalis and solvents, PTFE-lined butterfly valves provide near-universal chemical resistance.
- EPDM: water, hot water up to +120 °C, steam, wastewater, dilute acids – standard choice for drinking water (DVGW W270) and HVAC
- NBR: mineral oil, fuels, natural gas (DVGW Gas DIN EN 13774) up to +80 °C
- FKM / Viton: hydrocarbons, solvents, elevated temperatures up to +180 °C
- PTFE: near-universal chemical resistance – acids, alkalis, solvents
- RPTFE / INCONEL 718: metal-seated for high pressure and high temperature up to +360 °C
Verify media compatibility with the selected material using the FERGO resistance check tool.
Actuation options – manual, pneumatic or electric
All FERGO butterfly valves are prepared for direct actuator mounting via the standardised ISO 5211 actuator pad. Actuation choice depends on automation level, switching frequency and available energy source.
- Hand lever (up to DN150): for infrequent operation; locking lever holds the disc in defined positions
- Handwheel gearbox (from DN150): ergonomic operation at high torque for large nominal sizes
- Pneumatic actuator: double-acting (DA) or single-acting spring-return (SR – NC/NO); inherently spark-free, ATEX-suitable; NAMUR interface for solenoid valves – pneumatic butterfly valves
- Electric actuator: J4C quarter-turn actuator 24 V–240 V; positioner 0–10 V / 4–20 mA optional; PLC/SCADA integration – electric butterfly valves
FERGO supplies fully assembled and function-tested units comprising valve, actuator, NAMUR solenoid valve and limit switch box on request.
Certifications – DVGW, ATEX, TA-Luft, SIL 3
Certified variants are selectable in the product configurator using the "Certificate" filter. All test reports are available in the FERGO certificate portal.
- DVGW Drinking Water (W270 / EN 1074): legally required for valves in German drinking water networks; EPDM seat, GGG40 or stainless steel – DVGW butterfly valves
- DVGW Gas (DIN EN 13774): for natural gas and LPG pipelines; NBR seat, PN6–PN16
- ATEX II 2GDc: for explosive atmospheres Zone 1 (gas) and Zone 21 (dust); pneumatic actuators are inherently spark-free
- TA-Luft / ISO 15848-1: low-emission shaft seal; mandatory in licensed chemical plants under Germany's 42. BImSchV
- SIL 3 (IEC 61508): for safety-instrumented systems in chemical and energy plants – on request
- CE / PED 2014/68/EU: declaration of conformity and EN 10204 3.1 material certificate on request
Applications – water, HVAC, chemicals, gas and energy
In drinking water supply and gas distribution, DVGW-certified butterfly valves keep pipeline networks compliant. In heating, ventilation and air-conditioning (HVAC), EPDM-seated valves isolate heating and cooling circuits with minimal installation space. In chemical and process plants, PTFE butterfly valves and stainless steel butterfly valves protect process lines from corrosion and fugitive emissions. In power stations and steam systems, double-eccentric butterfly valves provide metal-seated shut-off up to +360 °C. Installing a strainer upstream protects the seat ring and disc from particulate matter in the medium.
Butterfly valves in stock – EU-wide delivery
All 1,037 butterfly valve variants in standard nominal sizes up to DN600 are available for immediate dispatch from the FERGO warehouse in Neuss, Germany. Standard DHL shipping reaches customers across Europe within 2–5 working days. Large nominal sizes DN650–DN1200 and custom configurations are assembled on request with short lead times. Collection from Neuss is available. Each valve ships with data sheet and 3D model. For project quantities and OEM enquiries: +49 (0) 21 31 / 15 39 28-0 or [email protected].












