The Ball Valve DN 40 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Versions: DN 40, PN16/40, flanged connection, DIN. Materials and seals: 1.0619 Steel body; TFM1600 seal (PTFE); Stainless Steel ball. Actuation and features: Electric rotary actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
Fergo ball valve type KH155-CS1TLF-DN40-[F1]-PN40 with EL actuator Flange connection: DIN PN16/40 Face-to-face: DIN EN 558-1 (basic series 1)/acc. to DIN 3202 F1 Full bore: 2-piece Body: 1.4408 (A351 CF8M) Ball: 1.4408 (A351 CF8M) Shaft: 1.4408 (A351 CF8M) Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Direct drive assembly: ISO 5211 Approval: TA-Luft, Firesafe ATEX: II 2G Ex h IIB T3 Gb / II 2D Ex h IIIC T180°C Db SIL3 IEC 61508:2010 Actuation: Electric rotary actuator Type: FG-J4C-S55 Multi-voltage system: 24 - 240V AC/DC, 50/60Hz Running time (90°): 13s ± 10% Housing: Polyamide (PA6) Limit switches: 2x SPST NO 5A 125V AC / 3A 250V AC Manual override Electronic torque limiter Automatic control room heating
The steel Flanged Ball Valve DN 40 PN16/40 in a short-face-to-face length offers a compact solution for industrial supply lines where installation space is limited. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 1 (F1). Steel body 1.0619, Stainless Steel ball, seat ring made of TFM1600 (PTFE). Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Operated via a Hand Lever. Suitable for heating systems, steam technology, mineral oil distribution and compact plant engineering.
The Ball Valve DN 40 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Models: DN 40, PN16/40, flanged connection, DIN. Materials and seals: body and ball made of Stainless Steel (1.4408); TFM1600 ball seal (PTFE). Actuation and features: Electric rotary actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
The Ball Valve DN 40 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Versions: DN 40, PN16/40, flanged connection, DIN. Materials and seals: 1.0619 Steel body; TFM1600 seal (PTFE); Stainless Steel ball. Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
The Ball Valve DN 40 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Versions: DN 40, PN16/40, flanged connection, DIN. Materials and seals: 1.0619 steel body; TFM1600 seal (PTFE); Stainless Steel ball. Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
