The stainless steel Flanged Ball Valve DN 150 PN10/16 with a Double-Acting Pneumatic Actuator provides automated safety shut-off for large-volume industrial main pipelines. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 15. Body and ball made of stainless steel 1.4408, ball seal TFM1600 (PTFE). Actuator mounting in accordance with ISO 5211. Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Proven in the chemical, petrochemical and energy sectors, as well as in large-scale automated process plants.
FERGO ball valve type Ball valve KH155-SSTLF-DN150 PN16 with DA actuator Flange connection according to DIN PN16 Face-to-face: DIN EN 558-1 (basic series 15)/acc. to DIN 3202 F5 Full bore, 2-piece Body: 1.4408 (A351 CF8M) Ball: 1.4408 stainless steel (A351 CF8M) Shaft: 1.4408 stainless steel (A351 CF8M) Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 16bar Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Pneumatik-Antrieb DA1-850-AN-F10/F12-C27 Design: Double-acting, 90° pivoting Housing: Aluminium, hard anodised Max. Operating pressure: 8 bar
The stainless steel Flanged Ball Valve DN 150 PN16 with a Single-Acting Pneumatic Actuator secures high-capacity main lines by means of spring-operated closure in the event of a loss of compressed air. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 15. Body and ball made of Stainless Steel 1.4408, seat ring TFM1600 (PTFE). Actuator mounting according to ISO 5211. Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Proven in chemical, petrochemical and safety-critical process plants.
The Ball Valve is a compact shut-off valve designed for safe, rapid and leak-tight operation. Specification:, Class 150, flanged connection, ASME. Materials and seals: Body made of Stainless Steel (1.4408); TFM1600 ball seal (PTFE). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. Further features: Flanged Ball Valve DN 150 6-inch ANSI 150 flanged connection in accordance with ASME B16.5 Class150 RF; Face-to-Face Length in accordance with ASME B16.10; ball & body made of Stainless Steel (1.4408).
The stainless steel Flanged Ball Valve DN 150 PN16 is designed for large nominal diameters in industrial process pipelines. Connection in accordance with DIN, Face-to-Face Length in accordance with EN 558-1 Series 15. Body and ball made of stainless steel 1.4408, seat ring made of TFM1600 (PTFE) for a long service life. Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Manual operation via a Hand Lever. Ideal for the chemical, petrochemical and energy sectors, as well as for large-volume supply lines.
The Ball Valve DN 150 PN40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Models: DN 150, PN40, DIN. Materials and seals: Stainless Steel body (1.4408); ball seal made of TFM1600 (PTFE). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. Further features: Ball Valve ; connection in accordance with DIN ; Face-to-Face Length EN 558-1 Series-15. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
