The Ball Valve DN 150 PN40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Models: DN 150, PN40, DIN. Materials and seals: Steel body (1.0619); ball seal made of TFM1600 (PTFE); ball made of Stainless Steel. Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. Further features: Flange Ball Valve ; Connection in accordance with DIN ; Face-to-Face Length EN 558-1 Series 15 (F5). The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
Nominal width :DN150 - 6'' inch
Connection :Flange PN40
Design :2 ways
Ball seal:TFM 1600 (PTFE)
Face to Face length :EN 558-1 series 15
Body:Steel
Material ball :Stainless steel (1.4301)
Actuation :Hand Lever
Certificate :TA Luft, Fire Safe, AD2000-A4
Option:Full passage
Availability:In Stock
Tender
FERGO ball valve type KH155-CS1TLF-DN150 Flange connection: DIN PN40 Face-to-face : DIN EN 558-1 (basic series 15)/acc. to DIN 3202 F5 Full bore : 2-piece Body: 1.0619 steel (A216 WCB) Ball : 1.4301 stainless steel (A351 CF8) Shaft: AISI 304 Seal ball: TFM 1600 (PTFE) Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Direct drive assembly: ISO 5211 Approval: TA-Luft, Firesafe ATEX: II 2G Ex h IIB T3 Gb / II 2D Ex h IIIC T180°C Db SIL3 IEC 61508:2010 Actuation: Hand lever
Download
Downloads "Flanged Ball Valve DN 150 PN40 Steel Hand Lever KH155"
The Flanged Ball Valve DN 150 PN16, made of cast steel (1.0619) with a stainless steel ball, is designed for industrial main pipelines. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 15 (F5), seat ring made of TFM1600 (PTFE). Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Manual operation via a Hand Lever. Proven in use in combined heat and power plants, steam technology, mineral oil supply and industrial plant engineering with large nominal diameters.
The stainless steel Flanged Ball Valve DN 150 PN16 with a Single-Acting Pneumatic Actuator secures high-capacity main lines by means of spring-operated closure in the event of a loss of compressed air. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 15. Body and ball made of Stainless Steel 1.4408, seat ring TFM1600 (PTFE). Actuator mounting according to ISO 5211. Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Proven in chemical, petrochemical and safety-critical process plants.
The Ball Valve DN 150 PN16 is a compact shut-off valve designed for safe, rapid and leak-tight shut-off operations. Models: DN 150, PN16, DIN. Materials and seals: Steel body 1.0619 for maximum durability. Complies with TA-Luft; Stainless Steel ball; seal made of TFM1600 (PTFE). Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The Ball Valve DN 150 PN16 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Models: DN 150, PN16, DIN. Materials and seals: Steel body 1.0619 for maximum robustness. Complies with standards TA-Luft; Stainless Steel ball; seal made of TFM1600 (PTFE). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The stainless steel Flanged Ball Valve DN 150 PN16 is designed for large nominal diameters in industrial process pipelines. Connection in accordance with DIN, Face-to-Face Length in accordance with EN 558-1 Series 15. Body and ball made of stainless steel 1.4408, seat ring made of TFM1600 (PTFE) for a long service life. Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Manual operation via a Hand Lever. Ideal for the chemical, petrochemical and energy sectors, as well as for large-volume supply lines.
The Ball Valve DN 150 PN40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Models: DN 150, PN40, DIN. Materials and seals: Stainless Steel body (1.4408); ball seal made of TFM1600 (PTFE). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. Further features: Ball Valve ; connection in accordance with DIN ; Face-to-Face Length EN 558-1 Series-15. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The stainless steel Flanged Ball Valve DN 150 PN10/16 with a Double-Acting Pneumatic Actuator provides automated safety shut-off for large-volume industrial main pipelines. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 15. Body and ball made of stainless steel 1.4408, ball seal TFM1600 (PTFE). Actuator mounting in accordance with ISO 5211. Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Proven in the chemical, petrochemical and energy sectors, as well as in large-scale automated process plants.
