The short-face-to-face length steel Flanged Ball Valve DN 100 PN10/16 is ideal for high-flow industrial pipelines where installation space is limited. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 1 (F1). Steel body 1.0619, Stainless Steel ball, seat ring made of TFM1600 (PTFE). Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Manual operation via Hand Lever with position indicator. Suitable for combined heat and power plants, steam technology, main mineral oil pipelines and large-scale industrial construction.
Nominal width :DN100 - 4'' inch
Connection :Flange PN10 , Flange PN16
Design :2 ways
Ball seal:TFM 1600 (PTFE)
Face to Face length :EN 558-1 series 1
Body:Steel
Material ball :Stainless steel (1.4301)
Actuation :Hand Lever
Certificate :TA Luft, Fire Safe, AD2000-A4
Option:Full passage
Availability:In Stock
Tender
Fergo ball valve KH155-CS1TLF-DN100-F1 Flange connection according to DIN PN16 Face-to-face: EN 558-1 (basic series 1)/acc. to DIN 3202 F1 Full bore: 2-piece Body: 1.0619 (A216 WCB) Ball: 1.4301 (A351 CF8) Shaft: AISI 316 Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 16bar Direct drive design according to ISO 5211 Approval: TA-Luft, Firesafe ATEX: II 2G Ex h IIB T3 Gb / II 2D Ex h IIIC T180°C Db SIL3 IEC 61508:2010 Actuation: Hand lever
Download
Downloads "KH155-F1 Ball Valve DN 100 PN10/16 Steel Hand Lever"
The gas Butterfly Valve DN 150 PN10/16 is designed for safe use in gas pipelines and provides a reliable shut-off function. Design: DN 150, PN10/16, flanged connection, flanges. Materials and seals: Body made of Ductile Iron GGG40; disc made of Ductile Iron GGG40 + Resicoat R4; flanges ; seat ring made of NBR. Actuation and fittings: Hand Lever. Approvals and standards: DVGW. The centric design facilitates cost-effective installation, high operational safety and reliable shut-off. Suitable for gas and biogas pipelines, energy supply, building services and industrial gas distribution systems.
The stainless steel Flanged Ball Valve DN 100 PN10/16 in a short-face-to-face length is suitable for large-capacity industrial pipelines with limited installation space. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 1 (F1). Body and ball made of Stainless Steel 1.4408, ball seal TFM1600 (PTFE). Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Operated via a Hand Lever with Position Indicator. Ideal for the chemical, petrochemical and power generation industries, and for large-volume main pipelines requiring a compact design.
The Butterfly Valve DN 65 PN16 is a robust industrial valve designed for the reliable shut-off and control of flow in pipework. Models: DN 65, PN10/, intermediate flange. Materials and seals: Body made of EN-GSJ-500-7 (GGG50) Ductile Iron; disc made of CF8M Stainless Steel; seal made of PTFE. Further features: Wafer-Type Butterfly Valve PTFE Electric Butterfly Valve ; Connection / / ANSI 150; Seal made of PTFE with Electric Rotary Actuator J4C-S55. The centric design facilitates cost-effective installation, high operational reliability and reliable shut-off.
The Ball Valve DN 100 PN10/16 is a compact shut-off valve designed for safe, rapid and leak-tight shut-off operations. Versions: DN 100, PN10/16, flanged connection, DIN. Materials and seals: Body and ball made of Stainless Steel; ball seal made of TFM1600 (PTFE). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The Butterfly Valve DN 80 PN16 is a robust industrial valve designed for the reliable shut-off and control of flow in pipework. Design: DN 80, PN10/, flanged. Materials and seals: Body made of EN-GSJ-500-7 (GGG50) Ductile Iron; disc made of CF8M Stainless Steel; seal made of PTFE with J4C-S85 electric actuator. Further features: Lug-Type Butterfly Valve PTFE Electric connection / ; PTFE -Enclosure; Operating time (90°): 29s ± 10%. The centric design facilitates cost-effective installation, high operational reliability and reliable shut-off.
The Ball Valve DN 100 PN40 is a compact shut-off valve designed for safe, rapid and tight-sealing operations. Design: DN 100, PN40, flanged connection, DIN. Materials and seals: Stainless Steel body (1.4408); ball seal made of TFM1600 (PTFE). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. Further features: F1 Ball Valve ; Flange connection in accordance with DIN ; Face-to-Face Length EN 558-1 Series 1 (F1). The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The Butterfly Valve DN 200 PN10 is a robust industrial valve designed for the reliable shut-off and control of flow in pipework. Design: DN 200, PN10, flanged. Materials and seals: Body and disc made of Stainless Steel (1.4408); seat ring made of EPDM. Operation and features: Hand Lever. Further features: Stainless Steel Lug-Type Butterfly Valve with Hand Lever; Lug-Type Butterfly Valve made of Stainless Steel; Butterfly Valve Connection ; Butterfly Valve Housing & Disc made of Stainless Steel (1.4408).
The Ball Valve DN 100 PN10/16 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Models: DN 100, PN10/16, DIN. Materials and seals: Steel body (1.0619); ball seal made of TFM1600 (PTFE); ball made of Stainless Steel. Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
The Ball Valve DN 100 PN10/16 is a compact shut-off valve designed for safe, rapid and leak-free operation. Versions: DN 100, PN10/16, flanged connection, DIN. Materials and seals: Body & ball made of Stainless Steel (1.4408); TFM1600 ball seal (PTFE). Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore enables fast switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media and safe shut-off in piping systems.
The Ball Valve DN 100 PN10/16 is a compact shut-off valve designed for safe, rapid and leak-tight shut-off operations. Versions: DN 100, PN10/16, flanged connection, DIN. Materials and seals: Body made of Steel (1.0619); ball seal made of TFM1600 (PTFE); ball made of Stainless Steel; spring-loaded. Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The strainer protects downstream system components by reliably separating particles from the fluid. Specification: 1/2 inch, ISO 228. Materials and seals: Housing and cover made of Brass. Operating data: 20 bar. Further features: Strainer 1/2 inch Brass connection to ISO 228; Stainless Steel filter 1.4301; mesh size Ø 500 µm (0.5 mm). The strainer is easy to clean and contributes to the safe operation of the entire system. Suitable for protecting valves, pumps, heat exchangers and measuring instruments in water, steam, heating and industrial systems.
The Strainer DN 125 PN16 protects downstream system components by reliably separating particles from the medium. Design: DN 125, PN16, DIN. Materials and seals: Stainless Steel strainer 1.4408. Further features: Flanged strainer ; Stainless Steel flange in accordance with DIN 2501 ; Face-to-Face Length in accordance with EN 558-1; housing/cover made of Stainless Steel (1.4408), shot-blasted. The strainer is easy to clean and contributes to the safe operation of the entire system.
The Strainer DN 25 PN16/40 protects downstream system components by reliably separating particles from the fluid. Design: DN 25, PN16/40, flanged connection. Materials and seals: Stainless Steel (SS304) strainer. Further features: Flanged Strainer Steel Flange Connection -40; EN 1092-1; Face-to-Face Length according to EN 558-1. The strainer is easy to clean and contributes to the safe operation of the entire system. Suitable for protecting valves, pumps, heat exchangers and measuring instruments in water, steam, heating and industrial systems.
The Strainer DN 65 PN10/16 protects downstream system components by reliably separating particles from the fluid. Design: DN 65, PN16, flanged connection. Materials and seals: Stainless Steel (SS316) strainer. Further features: Flanged Strainer Stainless Steel Flange Connection ; EN 1092-1; Face-to-Face Length according to EN 558-1. The strainer is easy to clean and contributes to the safe operation of the entire system. Suitable for protecting valves, pumps, heat exchangers and measuring instruments in water, steam, heating and industrial systems.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 1 inch, class 300, Flanges, ASME. Materials and seals: Body and bonnet 1.4404 / ASTM A182 F316L; Flanges ASME B 16.5. Further features: GESTRA MK 45A-1 1-inch class 300 Rhombusline Steam Trap; with 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve DN 15 PN40 reliably prevents unwanted backflow in piping systems. Design: DN 15, PN40, Flanges. Materials and seals: Body and bonnet 1.0460 / ASTM A105; Flanges EN 1092. Further features: GESTRA MK 45-2 Steam Trap Rhombusline thermal Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 2-inch, class 300, Flanges, ASME. Materials and seals: Flanges ASME B 16.5. Further features: GESTRA BK 15 2-inch ASME B 16.5 class 300 Thermal Steam Trap with bimetallic regulator; Installation between flanges ASME B 16.5; class 150 RF. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Design: 3/4 inch, class 300, flanges, ASME. Materials and seals: Flanges ASME B 16.5. Further features: GESTRA BK 45 3/4 inch ASME B 16.5 class 300 Installation between flanges ASME B 16.5; class 300 RF; Face-to-Face Length: 150 mm. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
