The short-body steel Flanged Ball Valve DN 15 PN16/40 is designed for compact industrial piping systems. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 1 (F1). Cast Steel body 1.0619, Stainless Steel ball, ball seal TFM1600 (PTFE). Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Manual operation via Hand Lever with Position Indicator. Proven in heating technology, steam systems and supply lines with limited installation space.
Fergo ball valve KH155-CS1TLF-DN15-F1 Flange connection according to DIN PN16/40 Face-to-face: EN 558-1 (basic series 1)/acc. to DIN 3202 F1 Full bore: 2-piece Body: 1.0619 (A216 WCB) Ball: 1.4301 (A351 CF8) Shaft: AISI 316 Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Direct drive design according to ISO 5211 Approval: TA-Luft, Firesafe ATEX: II 2G Ex h IIB T3 Gb / II 2D Ex h IIIC T180°C Db SIL3 IEC 61508:2010 Actuation: Hand lever
Download
Downloads "KH155-F1 Ball Valve DN 15 PN16/40 Steel Hand Lever"
The Ball Valve DN 15 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Versions: DN 15, PN16/40, flanged connection, DIN. Materials and seals: 1.0619 Steel body; TFM1600 seal (PTFE); Stainless Steel ball. Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
The Ball Valve DN 15 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight shut-off operations. Versions: DN 15, PN16/40, flanged connection, DIN. Materials and seals: Body made of Steel (1.0619); ball seal made of TFM1600 (PTFE); ball made of Stainless Steel; spring-loaded. Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The Ball Valve DN 15 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Design: DN 15, PN16/40, flanged connection, DIN. Materials and seals: Body made of Steel (1.0619); ball seal made of TFM1600 (PTFE); ball made of Stainless Steel. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. Further features: Ball Valve Electric Actuator; Flange connection in accordance with DIN ; Face-to-Face Length EN 558-1 Series 1 (F1). The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
