The short-body steel Flanged Ball Valve DN 50 PN16/40 is the space-saving shut-off solution for industrial piping. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 1 (F1). Cast Steel body 1.0619, Stainless Steel ball, ball seal TFM1600 (PTFE). Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Manual operation via Hand Lever with Position Indicator. Proven in heating technology, steam systems, mineral oil and process supply lines.
Fergo ball valve KH155-CS1TLF-DN50-F1 Flange connection according to DIN PN16/40 Face-to-face: EN 558-1 (basic series 1)/acc. to DIN 3202 F1 Full bore: 2-piece Body: 1.0619 (A216 WCB) Ball: 1.4301 (A351 CF8) Shaft: AISI 316 Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Direct drive design according to ISO 5211 Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Hand lever
The PFA-lined Plug Valve DN 80 PN10/16 is designed for corrosive and chemically demanding media. Design: DN 80, PN10/16, flanged connection, DIN. Materials and seals: Body made of Ductile Iron GGG40.3-PFA, lined. Operation and features: Hand Lever. Further features: Flowserve Durco Plug Valve Flange Connection in accordance with DIN EN 1092-2 - ; Face-to-Face Length EN558; Ductile Iron Plug Valve GGG40.3-PFA. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Ball Valve DN 50 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Versions: DN 50, PN16/40, flanged connection, DIN. Materials and seals: 1.0619 steel body; TFM1600 seal (PTFE); Stainless Steel ball. Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
The PFA-lined Plug Valve is designed for corrosive and chemically demanding media. Specification: Class 150, flanged connection, ASME. Materials and seals: Body made of Ductile Iron, lined with PGGG40.3-PFA. Operation and fittings: Hand Lever. Further features: Flowserve Durco Plug Valve 1" inch; Flange connection in accordance with ASME B16.5-150lbs; Face-to-Face Length in accordance with ASME B16.10-short pattern. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Ball Valve DN 50 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Models: DN 50, PN16/40, DIN. Materials and seals: 1.0619 Steel body; TFM1600 seal (PTFE); Stainless Steel ball. Actuation and features: Electric rotary actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and secure shut-off in piping systems.
The PFA-lined Plug Valve DN 15 PN16/40 is designed for corrosive and chemically demanding media. Design: DN 15, PN16/40, flanged connection, DIN. Materials and seals: Stainless Steel body (1.4408). Actuation and features: Hand Lever. Approvals and standards: TA-Luft. Further features: Flowserve Durco Sleeveline G4E Flange connection in accordance with DIN EN 1092-1 - ; Face-to-Face Length EN 558-1; Series 1 (ISO 5752). The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Ball Valve DN 50 PN16/40 is a compact shut-off valve designed for safe, rapid and tight-sealing operations. Models: DN 50, PN16/40, DIN. Materials and seals: Steel body (1.0619); ball seal made of TFM1600 (PTFE); Stainless Steel ball; spring-return. Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
The PFA-lined Plug Valve is designed for corrosive and chemically demanding media. Specification: 3/4 inch, Class 150, flanged connection. Materials and seals: Stainless Steel body (1.4408). Operation and features: Hand Lever. Approvals and standards: TA-Luft. Further features: Flowserve DURCO Sleeveline G4Z Plug Valve, 3/4 inch flanged connection in accordance with ANSI B16.5, Class 150; Face-to-Face Length in accordance with ANSI B16.10; reduced bore. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Ball Valve DN 50 PN16/40 is a compact shut-off valve designed for safe, rapid and tight-sealing operations. Versions: DN 50, PN16/40, flanged connection, DIN. Materials and seals: Body & ball made of Stainless Steel (1.4408); ball seal made of TFM1600(PTFE); spring-closing. Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The rubber expansion joint absorbs movement, vibrations and stresses in pipework systems. Design: DN 125, PN10/16, Flanges, DIN. Materials and seals: Nitrile/CR bellows NBR; galvanised Steel flanges. Operating data: Max. operating pressure 16 bar. Further features: Expansion joint DN 125 NBR with vacuum ring DIN PN10/16; rubber expansion joint design; Face-to-Face Length 130 mm. The flexible design reduces vibrations, compensates for misalignment during installation and relieves stress on connected pipework.
The rubber expansion joint absorbs movement, vibrations and stresses in pipework systems. Design: DN 50, PN10/16, flanges, DIN. Materials and seals: Bellows EPDM; flanges in accordance with DIN PN10/16; Stainless Steel flanges. Operating data: Max. operating pressure 16 bar. Further features: Expansion joint DN 50 PN10/16 Stainless Steel Flange; flanges in accordance with DIN PN10/16; rubber expansion joint design; Face-to-Face Length 130 mm. The flexible design reduces vibrations, compensates for misalignment during installation and relieves stress on connected pipework.
The rubber expansion joint absorbs movement, vibrations and stresses in pipework systems. Design: DN 50, PN10/16, Flanges, DIN. Materials and seals: Bellows: nitrile/CR – NBR; Flanges: as per DIN PN10/16; Flanges: galvanised Steel. Operating data: Max. operating pressure 16 bar. Further features: Rubber expansion joint DN 50 PN10/16 - 130mm Flanges in accordance with DIN PN10/16; Rubber expansion joint design; Face-to-Face Length 130mm. The flexible design reduces vibrations, compensates for installation misalignments and relieves stress on connected pipework.
The rubber expansion joint absorbs movement, vibrations and stresses in pipework systems. Specification: 1 inch, Flanges, Socket, Female Thread, Thread. Operating data: 16 bar. Further features: 1-inch socket expansion joint for water. Design: rubber expansion joint; double-corded; Female Thread to BSPP. The flexible design reduces vibrations, compensates for installation misalignments and relieves stress on connected pipework. Suitable for pump connections, pipework decoupling, vibration damping, and heating, cooling water and industrial systems.
The rubber expansion joint absorbs movement, vibrations and stresses in pipework systems. Design: DN 65, PN10/16, Flanges, DIN. Materials and seals: Bellows EPDM; Flanges in accordance with DIN PN10/16; Flanges made of galvanised Steel. Operating data: Max. operating pressure 16 bar. Further features: Pipe rubber expansion joint DN 65 made of galvanised Steel; Flanges in accordance with DIN PN10/16; rubber expansion joint design; Face-to-Face Length 150 mm. The flexible design reduces vibrations, compensates for misalignment during installation and relieves stress on connected pipework.
The knife Gate Valve DN 65 PN10 is designed for the safe shut-off of liquid, slurry or media containing solids. Design: DN 65, PN10. Materials and seals: Body made of Cast Iron (GG25); seat ring made of EPDM with profiled steel core reinforcement; packing PTFE -Synt./ EPDM / PTFE -Synt. Operation and fittings: Handwheel. Further features: Knife Gate Valve double-sealing design; gate and spindle made of Stainless Steel; gate guide with integrated scraping action. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Gate Valve DN 125 PN10 is designed for the safe shut-off of liquid, slurry or media containing solids. Model: DN 125, PN10. Materials and seals: Body made of Cast Iron (GG25); seat ring made of EPDM. Actuation and features: Double-Acting Pneumatic Actuator. Further features: Gate Valve, single-seal design; Gate made of SS304L Stainless Steel (1.4306); spindle made of SS303 Stainless Steel (1.4305) with a Double-Acting Pneumatic Actuator. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Gate Valve DN 100 is designed for the safe shutoff of liquid, slurry or media containing solids. Model:. Materials and seals: Body made of Cast Iron (GG25); seat ring made of metal. Operation and features: Handwheel. Further features: Gate Valve, single-seal design; gate made of SS304L Stainless Steel (1.4306); Stainless Steel SS303 spindle (1.4305). The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The knife Gate Valve DN 150 PN10 is designed for the safe shut-off of liquid, slurry or media containing solids. Models: DN 150, PN10. Materials and seals: Body made of Cast Iron (GG25); seat ring made of NBR. Further features: Knife Gate Valve, single-seal design; gate made of SS304L stainless steel (1.4306); stem made of SS303 stainless steel (1.4305). The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
