The Check Valve DN 25 PN40 reliably prevents unwanted backflow in piping systems. Design: DN 25, PN40, Flanges. Materials and seals: Body and bonnet 1.0460 / ASTM A105; Flanges EN 1092. Further features: GESTRA MK 45-1 Steam Trap; Rhombusline thermal Steam Trap With 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Design: 1/2 inch, welded ends. Further features: GESTRA BK 45 1/2 inch pipe welded ends Connection: Pipe welded ends in accordance with EN 12627; joint type in accordance with ISO 9692 -1; code 1.3 (30° chamfer). The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Design: 3/4 inch, welded ends. Further features: GESTRA BK 45 3/4 inch pipe welded ends Connection: Pipe welded ends in accordance with EN 12627; joint type in accordance with ISO 9692 -1; code 1.3 (30° chamfer). The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Design: 1 inch, welded ends. Further features: GESTRA BK 45 1-inch pipe welded ends Connection: Pipe welded ends in accordance with EN 12627; joint type in accordance with ISO 9692 -1; code 1.3 (30° chamfer). The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Design: 1/2 inch, class 300, flanges, ASME. Materials and seals: Flanges ASME B 16.5. Further features: GESTRA BK 45 1/2 inch ASME B 16.5 class 300 Installation between flanges ASME B 16.5; class 300 RF; Face-to-Face Length: 150 mm. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Design: 1 inch, class 300, Flanges, ASME. Materials and seals: Flanges ASME B 16.5. Further features: GESTRA BK 45 1 inch ASME B 16.5 class 300 Installation between flanges ASME B 16.5; class 300 RF; Face-to-Face Length: 160 mm. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Design: 3/4 inch, class 150, flanges, ASME. Materials and seals: Flanges ASME B 16.5. Further features: GESTRA BK 45 3/4 inch ASME B 16.5 class 150 Installation between flanges ASME B 16.5; class 150 RF; Face-to-Face Length: 150 mm. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Design: 1 inch, class 150, Flanges, ASME. Materials and seals: Flanges ASME B 16.5. Further features: GESTRA BK 45 1 inch ASME B 16.5 class 150 Installation between flanges ASME B 16.5; class 150 RF; Face-to-Face Length: 160 mm. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate with minimal steam loss. Specification: 3/4 inch, socket, thread, ISO 228. Further features: GESTRA BK 45 3/4 inch thread socket connection: threads to EN ISO 228 -1; Face-to-Face Length: 95 mm; 1.0460/ASTM A105 bonnet. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, socket, thread, ISO 228. Further features: GESTRA BK 45 1/2 inch thread socket connection: thread sockets to EN ISO 228 -1; Face-to-Face Length: 95 mm; 1.0460/ASTM A105 bonnet. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Design: 1/2 inch, class 150, flanges, ASME. Materials and seals: Flanges ASME B 16.5. Further features: GESTRA BK 45 1/2 inch ASME B 16.5 class 150 Installation between flanges ASME B 16.5; class 150 RF; Face-to-Face Length: 150 mm. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Design: 3/4 inch, class 300, flanges, ASME. Materials and seals: Flanges ASME B 16.5. Further features: GESTRA BK 45 3/4 inch ASME B 16.5 class 300 Installation between flanges ASME B 16.5; class 300 RF; Face-to-Face Length: 150 mm. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 15 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 15, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 20 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 20, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 25 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 25, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 32 for horizontal pipework; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 40 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 40, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 50 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 50, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 65 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 65, PN40, Flanges. Materials and seals: Body 1.0460 / ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap for steam lines with DUPLEX control assembly; End fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap DN 15 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 15, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap for steam lines with DUPLEX control assembly; End fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap DN 20 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 20, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Steam trap with DUPLEX control assembly; End fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 25 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 25, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 40 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 40, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap with DUPLEX control assembly; End fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 50 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 50, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 65 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 65, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap for steam lines with DUPLEX control assembly; End fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap DN 15 PN40 ensures reliable condensate discharge with minimal steam loss. Design: DN 15, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 20 PN40 ensures reliable condensate discharge with minimal steam loss. Design: DN 20, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Steam trap with DUPLEX control assembly; End fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 25 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 25, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 13 for horizontal pipework; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 40 PN40 ensures reliable condensate drainage with minimal steam loss. Design: DN 40, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap with DUPLEX control assembly; End fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 50 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 50, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 65 PN40 ensures reliable condensate discharge with minimal steam loss. Design: DN 65, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap for steam lines with DUPLEX control assembly; End fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 15 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 15, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 20 PN40 ensures reliable condensate discharge with minimal steam loss. Design: DN 20, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Steam condensate separator with DUPLEX control kit; End fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 25 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 25, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 40 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 40, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap with DUPLEX control assembly; end fitting (AO) 08 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 50 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 50, PN40, Flanges. Materials and seals: Body 1.0460 / ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 65 PN40 ensures reliable condensate discharge with minimal steam loss. Design: DN 65, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap for steam lines with DUPLEX control assembly; End fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 15 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 15, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 20 PN40 ensures reliable condensate discharge with minimal steam loss. Design: DN 20, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Steam condensate separator with DUPLEX control assembly; End fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 25 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 25, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 40 PN40 ensures reliable condensate discharge with minimal steam loss. Design: DN 40, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap with DUPLEX control assembly; end fitting (AO) 04 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 50 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 50, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 65 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 65, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap for steam lines with DUPLEX control assembly; End fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap DN 15 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 15, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 20 PN40 ensures reliable condensate discharge with minimal steam loss. Design: DN 20, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Steam condensate separator with DUPLEX control assembly; End fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 25 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 25, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap float-type Steam Trap with DUPLEX control assembly; End fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 40 PN40 ensures reliable drainage of condensate with minimal steam loss. Design: DN 40, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap with DUPLEX control assembly; End fitting (AO) 02 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 50 PN40 ensures reliable drainage of condensate whilst minimising steam loss. Design: DN 50, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap DN 65 PN40 ensures reliable condensate discharge with minimal steam loss. Design: DN 65, PN40, Flanges. Materials and seals: Body 1.0460 /ASTM A105; Flanges EN 1092-1. Further features: GESTRA UNA 45hl Steam Trap Duplex Steam Trap for steam lines with DUPLEX control assembly; End fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate with minimal steam loss. Specification: 1/2 inch, Class 150, Flanges, ASME. Materials and seals: Body 1.0460 / ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 3/4 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate with minimal steam loss. Specification: 1 inch, Class 150, Flanges, ASME. Materials and seals: Body 1.0460 /ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 2-inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate with minimal steam loss. Specification: 1/2 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate with minimal steam loss. Specification: 1 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 3/4 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 2-inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flanges, ASME. Materials and seals: Body 1.0460 /ASTM A105; flangesASMEB 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate with minimal steam loss. Specification: 3/4 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate with minimal steam loss. Specification: 1/2 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 2-inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate with minimal steam loss. Specification: 3/4 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; FlangesASMEB 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 2-inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 1/2 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 3/4 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate with minimal steam loss. Specification: 1 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 1/2 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 2-inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate with minimal steam loss. Specification: 1/2 inch, Class 150, Flanges, ASME. Materials and seals: Body 1.0460 / ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 3/4 inch, Class 150, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 2-inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 150, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 150 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 1/2 inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; FlangesASMEB 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 3/4 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1 inch, Class 300, Flange, ASME. Materials and seals: Body 1.0460 /ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; FlangesASMEB 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 2-inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 1/2 inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 32 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; flangesASMEB 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 1 inch, Class 300, Flange, ASME. Materials and seals: Body 1.0460 /ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 3/4 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; flangesASMEB 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 2-inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 1/2 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 22 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; flangesASMEB 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 3/4 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1 inch, Class 300, Flange, ASME. Materials and seals: Body 1.0460 /ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; flangesASMEB 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 2-inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 1/2 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; flangesASMEB 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 13 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 3/4 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate with minimal steam loss. Specification: 1 inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; FlangesASMEB 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 2-inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 1/2 inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; flangesASMEB 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 8 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; FlangesASMEB 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 3/4 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1 inch, Class 300, Flanges, ASME. Materials and seals: Body 1.0460 /ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flanges, ASME. Materials and seals: Body1.0460/ASTM A105; FlangesASMEB 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 2-inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 1/2 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; FlangesASMEB 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 4 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; flangesASMEB 16.5. Further features: GESTRA UNA 45hl 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 3/4 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 3/4-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1 inch, Class 300, Flange, ASME. Materials and seals: Body 1.0460 /ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 1-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; flangesASMEB 16.5. Further features: GESTRA UNA 45hl 1 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction to the left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use.
The Steam Trap ensures reliable condensate drainage with minimal steam loss. Specification: 2-inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; Flanges ASME B 16.5. Further features: GESTRA UNA 45hl 2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam lines, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Steam Trap ensures reliable drainage of condensate whilst minimising steam loss. Specification: 1/2 inch, Class 300, Flange, ASME. Materials and seals: Body1.0460/ASTM A105; flangesASMEB 16.5. Further features: GESTRA UNA 45hl 2 1/2-inch Class 300 float-type Steam Trap with DUPLEX control assembly; end fitting (AO) 2 for horizontal piping; flow direction left. The design ensures safe operation, easy integration and reliable performance in everyday industrial use. Suitable for steam pipes, heat exchangers, heating coils, condensate networks and energy-efficient steam and condensate systems.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1/2 inch, class 150, Flanges, ASME. Materials and seals: Flanges ASME B 16.5. Further features: GESTRA BK 15 1 1/2 inch ASME B 16.5 class 150 Thermal Steam Trap with bimetallic regulator; Installation between flanges ASME B 16.5; class 150 RF. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 2-inch, class 150, flanges, ASME. Materials and seals: flanges ASME B 16.5. Further features: GESTRA BK 15 2-inch ASME B 16.5 class 150 Thermal Steam Trap with bimetallic regulator; Installation between flanges ASME B 16.5; class 150 RF. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1/2 inch, class 300, Flanges, ASME. Materials and seals: Flanges ASME B 16.5. Further features: GESTRA BK 15 1 1/2 inch ASME B 16.5 class 300 Thermal Steam Trap with bimetallic regulator; Installation between flanges ASME B 16.5; class 300 RF. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 2-inch, class 300, Flanges, ASME. Materials and seals: Flanges ASME B 16.5. Further features: GESTRA BK 15 2-inch ASME B 16.5 class 300 Thermal Steam Trap with bimetallic regulator; Installation between flanges ASME B 16.5; class 150 RF. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
The Check Valve DN 50 PN40 reliably prevents unwanted backflow in piping systems. Design: DN 50, PN40, flanges. Materials and seals: flanges EN 1092. Further features: GESTRA BK 15 Steam Trap; thermal Steam Trap with bimetallic regulator; installation between Flanges EN 1092. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1/2 inch, socket, thread, ISO 228. Further features: GESTRA BK 15 G1 1/2" Steam Trap; thermal Steam Trap with bimetallic regulator; threaded sockets to EN ISO 228 -1; Face-to-Face Length: 130 mm. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
The Check Valve DN 40 PN40 reliably prevents unwanted backflow in pipework systems. Versions: DN 40, PN40, Flanges. Materials and seals: Flanges EN 1092. Further features: GESTRA BK15 Steam Trap ; Thermal Steam Trap with Bimetallic Regulator; Installation between Flanges EN 1092; Face-to-Face Length: 230 mm. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 2-inch, socket, thread, ISO 228. Further features: GESTRA BK 15 G2" Steam Trap; thermal Steam Trap with bimetallic regulator; threaded sockets to EN ISO 228 -1; Face-to-Face Length: 210 mm. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 3/4 inch, socket, Thread, ISO 228. Materials and seals: Body and bonnet1.4404/ASTM A182 F316L. Further features: GESTRA MK 45A-1 G3/4-inch threaded socket Rhombusline Steam Trap; with 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1/2 inch, socket, thread, ISO 228. Materials and seals: Body and bonnet1.0460/ASTM A105. Further features: GESTRA MK 45-2 G1/2 inch threaded sockets; GESTRA Rhombusline Steam Trap; With flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in piping systems. Design: 1 inch, socket, thread, ISO 228. Materials and seals: Body and bonnet 1.0460 / ASTM A105. Further features: GESTRA MK 45-2 G1 inch thread sockets; GESTRA Rhombusline Thermal Steam Trap; With flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 1/2 inch, socket, thread, ISO 228. Materials and seals: Body and bonnet1.4404/ASTM A182 F316L. Further features: GESTRA MK 45A-1 G1/2 inch threaded socket Rhombusline Steam Trap; with 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1/2 inch, socket, thread, ISO 228. Materials and seals: Body and bonnet1.0460/ASTM A105. Further features: GESTRA MK 45-1 G1/2 inch thread socket Steam Trap Rhombusline; With 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1/2 inch, class 150, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; flanges ASME B 16.5. Further features: GESTRA MK 45-2 1/2 inch class 150 GESTRA Rhombusline Thermal Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1 inch, class 150, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; flanges ASME B 16.5. Further features: GESTRA MK 45-2 1-inch class 150 GESTRA Rhombusline thermal Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve DN 25 PN40 reliably prevents unwanted backflow in piping systems. Design: DN 25, PN40, Flanges. Materials and seals: Body and bonnet 1.0460 / ASTM A105; Flanges EN 1092. Further features: GESTRA MK 45-2 Rhombusline Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1/2 inch, class 150, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; flanges ASME B 16.5. Further features: GESTRA MK 45-1 1/2 inch ASME B 16.5 class 150 RF Rhombusline thermal Steam Trap; with 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve DN 15 PN40 reliably prevents unwanted backflow in piping systems. Versions: DN 15, PN40, Flanges. Materials and seals: Body and bonnet 1.0460 / ASTM A105; Flanges EN 1092. Further features: GESTRA MK 45-1 Steam Trap; Rhombusline Steam Trap; with 5N1 tandem diaphragm (standard) for small condensate volumes. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 3/4 inch, class 300, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; flanges ASME B 16.5. Further features: GESTRA MK 45-1 3/4 inch ASME B 16.5 class 300 RF Rhombusline Steam Trap; with 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated backflow preventer. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 3/4 inch, class 300, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; flanges ASME B 16.5. Further features: GESTRA MK 45-2 3/4 inch class 300 GESTRA Rhombusline thermal Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1/2 inch, class 300, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; flanges ASME B 16.5. Further features: GESTRA MK 45-1 1/2 inch ASME B 16.5 class 300 RF Rhombusline Steam Trap; with 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 3/4 inch, class 150, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; Flanges ASME B 16.5. Further features: GESTRA MK 45-2 3/4 inch class 150 GESTRA Rhombusline Thermal Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1 inch, class 300, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; flanges ASME B 16.5. Further features: GESTRA MK 45-1 1 inch ASME B 16.5 class 300 RF Rhombusline Steam Trap; with 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 1 inch, class 300, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; flanges ASME B 16.5. Further features: GESTRA MK 45-2 1-inch class 300 GESTRA Rhombusline thermal Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1 inch, class 150, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; flanges ASME B 16.5. Further features: GESTRA MK 45-1 1 inch ASME B 16.5 class 150 RF Rhombusline thermal Steam Trap; with 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve DN 20 PN40 reliably prevents unwanted backflow in piping systems. Design: DN 20, PN40, Flanges. Materials and seals: Body and bonnet 1.0460 / ASTM A105; Flanges EN 1092. Further features: GESTRA MK 45-2 Rhombusline thermal Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 1 inch, socket, Thread, ISO 228. Materials and seals: Body and bonnet1.4404/ASTM A182 F316L. Further features: GESTRA MK 45A-1 G1-inch threaded socket Rhombusline Steam Trap; with 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 3/4 inch, socket, thread, ISO 228. Materials and seals: Body and bonnet1.0460/ASTM A105. Further features: GESTRA MK 45-2 G3/4 inch threaded sockets; GESTRA Rhombusline Thermal Steam Trap; With flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 3/4 inch, class 150, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; Flanges ASME B 16.5. Further features: GESTRA MK 45-1 3/4 inch ASME B 16.5 class 150 RF Rhombusline Steam Trap; with 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 1/2 inch, socket, thread, ISO 228. Materials and seals: Body and bonnet1.4404/ASTM A182 F316L. Further features: GESTRA MK 45A-2 G1/2 inch threaded socket Rhombusline Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Specification: 1/2 inch, Class 300, Flanges, ASME. Materials and seals: Body and bonnet 1.0460 / ASTM A105; flanges ASME B 16.5. Further features: GESTRA MK 45-2 1/2 inch Class 300 GESTRA Rhombusline Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 3/4 inch, socket, thread, ISO 228. Materials and seals: Body and bonnet1.4404/ASTM A182 F316L. Further features: GESTRA MK 45A-2 G3/4-inch threaded socket Rhombusline Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 1 inch, socket, thread, ISO 228. Materials and seals: Body and bonnet 1.0460 / ASTM A105. Further features: GESTRA MK 45-1 G1 inch thread socket Steam Trap Rhombusline; With 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve DN 15 PN40 reliably prevents unwanted backflow in piping systems. Design: DN 15, PN40, Flanges. Materials and seals: Body and bonnet 1.0460 / ASTM A105; Flanges EN 1092. Further features: GESTRA MK 45-2 Steam Trap Rhombusline thermal Steam Trap; with flat diaphragm 5N2 (standard) for larger condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in piping systems. Specification: 3/4 inch, socket, thread, ISO 228. Materials and seals: Body and bonnet1.0460/ASTM A105. Further features: GESTRA MK 45-1 G3/4 inch thread socket Steam Trap Rhombusline; With 5N1 tandem diaphragm (standard) for small condensate volumes; with Strainer (Y-strainer) and integrated non-return valve. The compact design allows for easy installation and reliably protects pumps and system components against backflow.
The Check Valve reliably prevents unwanted backflow in pipework systems. Design: 1 inch, socket, thread, ISO 228. Materials and seals: Body and bonnet1.4404/ASTM A182 F316L. Further features: GESTRA MK 45A-2 G1 inch thread socket Steam Trap Rhombusline; With single seat; standard capsule 5N2 for larger condensate flow rates. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
The Check Valve DN 20 PN40 reliably prevents unwanted backflow in piping systems. Versions: DN 20, PN40, Flanges. Materials and seals: Body and bonnet 1.0460 / ASTM A105; Flanges EN 1092. Further features: GESTRA MK 45-1 Steam Trap; Rhombusline Steam Trap; with 5N1 tandem diaphragm (standard) for small quantities of condensate. The compact design allows for easy installation and reliably protects pumps and system components against backflow. Suitable for pump systems, water technology, heating and cooling circuits, industrial supply systems and pipework with backflow protection.
