The Ball Valve DN 25 PN16 is a compact shut-off valve designed for safe, rapid and tight-sealing operations. Models: DN 25, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal PTFE + glass fibre; ball made of solid Stainless Steel (1.4404). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: TA-Luft. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
The Flanged Ball Valve DN 25 PN16/40 combines a pressure-resistant cast steel body (1.0619) with a stainless steel ball and TFM1600 - PTFE - seal. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 14 (F4). Certified in accordance with TA-Luft, Firesafe, ATEX and AD2000-A4. Manual operation via a sturdy Hand Lever. Suitable for steam, oil and heating systems as well as industrial processes with increased pressure requirements.
The Ball Valve is a compact shut-off valve designed for safe, rapid and leak-free operation. Versions: DN 100, PN16, DIN. Materials and seals: Stainless Steel body (1.4408); ball and seat rings: PTFE+25% GF (soft-sealing). Operation and fittings: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX. Operating data: 40 bar. Further features: Flanged Ball Valve DN 100 PN16 made of Stainless Steel with duplex shaft connection in accordance with DIN ; Face-to-Face Length in accordance with EN 558-1; ball & body made of Stainless Steel (1.4408).
The Ball Valve is a compact shut-off valve designed for safe, rapid and leak-free operation. Design: DN 50, PN40, DIN. Materials and seals: Stainless Steel body (1.4408); ball seat rings: PTFE+25% GF (soft-sealing). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX. Operating data: 40 bar. Further features: Stainless Steel Flanged Ball Valve DN 50 PN16/40 with duplex shaft connection in accordance with DIN ; Face-to-Face Length in accordance with EN 558-1; ball & body made of Stainless Steel (1.4408).
The Ball Valve DN 25 PN16/40 is a compact shut-off valve designed for safe, rapid and tight-sealing operations. Models: DN 25, PN16/40, DIN. Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. Further features: AD2000-A4. Manual operation included. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and secure shut-off in piping systems.
The Ball Valve is a compact shut-off valve designed for safe, rapid and leak-free operation. Design: DN 125, PN16, DIN. Materials and seals: Stainless Steel body (1.4408); ball seat rings: PTFE+25% GF (soft-sealing). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX. Operating data: 40 bar. Further features: Stainless Steel Flanged Ball Valve DN 125 PN16 with duplex shaft connection in accordance with DIN ; Face-to-Face Length in accordance with EN 558-1; ball & body made of Stainless Steel (1.4408).
The Ball Valve is a compact shut-off valve designed for safe, rapid and leak-free operation. Design: DN 150, PN16, DIN. Materials and seals: Stainless Steel body (1.4408); ball seat rings: PTFE+25% GF (soft-sealing). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX. Operating data: 40 bar. Further features: Stainless Steel Flanged Ball Valve DN 150 PN16 with duplex shaft connection in accordance with DIN ; Face-to-Face Length in accordance with EN 558-1; ball & body made of Stainless Steel (1.4408).
The Ball Valve is a compact shut-off valve designed for safe, rapid and leak-free operation. Versions: DN 20, PN16/40, DIN. Materials and seals: Stainless Steel body (1.4408); ball and seat rings: PTFE+25% GF (soft-sealing). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX. Operating data: 40 bar. Further features: Stainless Steel Flanged Ball Valve DN 20 PN16/40 with duplex shaft connection to DIN ; Face-to-Face Length according to EN 558-1; ball & body made of Stainless Steel (1.4408).
The Ball Valve is a compact shut-off valve designed for safe, rapid and leak-free operation. Design: DN 32, PN40, DIN. Materials and seals: Stainless Steel body (1.4408); ball seat rings: PTFE+25% GF (soft-sealing). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX. Operating data: 40 bar. Further features: Stainless Steel Flanged Ball Valve DN 32 PN16/40 with duplex shaft connection in accordance with DIN ; Face-to-Face Length in accordance with EN 558-1; ball & body made of Stainless Steel (1.4408).
The Ball Valve is a compact shut-off valve designed for safe, rapid and leak-free operation. Design: DN 15, PN40, DIN. Materials and seals: Stainless Steel body (1.4408); ball seat rings: PTFE+25% GF (soft-sealing). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX. Operating data: 40 bar. Further features: Stainless Steel Flanged Ball Valve DN 15 PN16/40 with duplex shaft connection in accordance with DIN ; Face-to-Face Length in accordance with EN 558-1; ball & body made of Stainless Steel (1.4408).
The Ball Valve is a compact shut-off valve designed for safe, rapid and leak-free operation. Design: DN 25, PN40, DIN. Materials and seals: Stainless Steel body (1.4408); ball seat rings: PTFE+25% GF (soft-sealing). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX. Operating data: 40 bar. Further features: Stainless Steel Flanged Ball Valve DN 25 PN16/40 with duplex shaft connection in accordance with DIN ; Face-to-Face Length in accordance with EN 558-1; ball & body made of Stainless Steel (1.4408).
The Ball Valve is a compact shut-off valve designed for safe, rapid and leak-free operation. Design: DN 40, PN40, DIN. Materials and seals: Stainless Steel body (1.4408); ball seat rings: PTFE+25% GF (soft-sealing). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX. Operating data: 40 bar. Further features: Stainless Steel Flanged Ball Valve DN 40 PN16/40 with duplex shaft connection in accordance with DIN ; Face-to-Face Length in accordance with EN 558-1; ball & body made of Stainless Steel (1.4408).
The Ball Valve DN 65 PN16 is a compact shut-off valve designed for safe, rapid and tight-sealing operations. Models: DN 65, PN16, DIN. Materials and seals: Stainless Steel body (1.4408); ball and seat rings: PTFE+25% GF (soft-sealing). Operation and features: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX. Operating data: Max. operating pressure 40 bar. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
The Ball Valve is a compact shut-off valve designed for safe, rapid and leak-free operation. Versions: DN 80, PN16, DIN. Materials and seals: Stainless Steel body (1.4408); ball and seat rings: PTFE+25% GF (soft-sealing). Operation and fittings: Hand Lever. Approvals and standards: TA-Luft, Firesafe, ATEX. Operating data: 40 bar. Further features: Stainless Steel Flanged Ball Valve DN 80 PN16 with duplex shaft connection in accordance with DIN ; Face-to-Face Length in accordance with EN 558-1; ball & body made of Stainless Steel (1.4408).
The gas Ball Valve DN 65 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 65, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic gas flange Ball Valve ; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The gas Ball Valve DN 125 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 125, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Gas/biogas Ball Valve DVGW – for natural gas; liquefied petroleum gas Connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4.
The gas Ball Valve DN 50 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 50, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic gas flange Ball Valve ; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for fast switching operations and a tight-sealing shut-off.
The gas Ball Valve DN 150 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 150, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic Flange Ball Valve for gas; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The gas Ball Valve DN 25 PN16 is designed for safe shut-off applications in gas and biogas plants. Versions: DN 25, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Hand Lever. Approvals and standards: DVGW, TA-Luft. Further features: Gas Flange Ball Valve for gas; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The gas Ball Valve DN 25 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 25, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic Flange Ball Valve Connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4; Ball Valve Body made of Ductile Iron (GGG40).
The gas Ball Valve DN 80 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 80, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic Flange Ball Valve for gas connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4; Ball Valve Body made of Ductile Iron (GGG40).
The gas Ball Valve DN 32 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 32, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic gas flange Ball Valve ; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for fast switching operations and a tight-sealing shut-off.
The gas Ball Valve DN 40 PN16 is designed for safe shut-off applications in gas and biogas plants. Design: DN 40, PN16, flanged connection, DIN. Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Single-Acting, Spring-Return (NC – Normally Closed); energy and plant engineering. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for gas pipelines, biogas applications, energy supply and industrial piping systems with increased safety requirements.
The gas Ball Valve DN 80 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 80, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic flange Ball Valve for gas; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The gas Ball Valve DN 100 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 100, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic Flange Ball Valve for gas; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The gas Ball Valve DN 150 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 150, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic gas flange Ball Valve for gas; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for fast switching operations and a tight-sealing shut-off.
The gas Ball Valve DN 40 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 40, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic gas flange Ball Valve ; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The gas Ball Valve is designed for safe shut-off applications in gas and biogas plants. Models: DN 50, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic Flanged Ball Valve DN 50 PN16 for gas; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for fast switching operations and a tight-sealing shut-off.
The gas ball valve is designed for safe shut-off applications in gas and biogas plants. Models: DN 125, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic Flanged Ball Valve DN 125 PN16 DVGW Connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4; Ball Valve Body made of Ductile Iron (GGG40).
The gas Ball Valve DN 25 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 25, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic gas flange Ball Valve ; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off.
The gas Ball Valve DN 65 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 65, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic gas flange Ball Valve for gas; connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4. The full or reduced bore allows for fast switching operations and a tight-sealing shut-off.
The gas Ball Valve DN 32 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 32, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Operation and features: Single-Acting. Approvals and standards: DVGW, TA-Luft. Further features: Pneumatic Flange Ball Valve for gas connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4; Ball Valve Body made of Ductile Iron (GGG40).
The gas Ball Valve DN 100 PN16 is designed for safe shut-off applications in gas and biogas plants. Models: DN 100, PN16, DIN. Materials and seals: Body made of Ductile Iron (GGG40); ball seal made of PTFE; ball made of Stainless Steel (1.4304). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: DVGW, TA-Luft. Further features: Gas/biogas Ball Valve DVGW – for natural gas; liquefied petroleum gas Pneumatic connection in accordance with DIN ; Face-to-Face Length in accordance with EN558-1 Series 14 - F4.
The gas Ball Valve DN 25 PN40 is designed for safe shut-off applications in gas and biogas plants. Models: DN 25, PN40, DIN. Materials and seals: Stainless Steel body (1.4408); ball seal PTFE. Operation and features: Hand Lever. Approvals and standards: DVGW, TA-Luft. Operating data: Max. operating pressure 40 bar. Further features: Compact ball valve according to DIN Ball seal PTFE; Ball & body Stainless Steel (1.4408); Full bore. The full or reduced bore enables rapid switching operations and a tight-sealing shut-off.
