The Ball Valve DN 40 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Versions: DN 40, PN16/40, flanged connection, DIN. Materials and seals: 1.0619 Steel body; TFM1600 seal (PTFE); Stainless Steel ball. Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
FERGO ball valve type Ball valve KH155-CS1TLF-DN40 PN40 with DA actuator Flange connection according to DIN PN16/40 Face-to-face: DIN EN 558-1 (basic series 1)/acc. to DIN 3202 F1 Full bore, 2-piece Body: 1.0619 steel (A216 WCB) Ball: 1.4301 stainless steel (A351 CF8) Shaft: AISI 304 Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Pneumatik-Antrieb DA1-80-AN-F05/F07-C17 Design: Double-acting, 90° pivoting Housing: Aluminium, hard anodised Max. Operating pressure: 8 bar
The steel Flanged Ball Valve DN 40 PN16/40 in a short-face-to-face length offers a compact solution for industrial supply lines where installation space is limited. Connection in accordance with DIN, Face-to-Face Length EN 558-1 Series 1 (F1). Steel body 1.0619, Stainless Steel ball, seat ring made of TFM1600 (PTFE). Approvals: TA-Luft, Firesafe, ATEX and AD2000-A4. Operated via a Hand Lever. Suitable for heating systems, steam technology, mineral oil distribution and compact plant engineering.
The Ball Valve DN 40 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Versions: DN 40, PN16/40, flanged connection, DIN. Materials and seals: Body and ball made of Stainless Steel; ball seal made of TFM1600 (PTFE). Actuation and features: Double-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
The Ball Valve DN 40 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Versions: DN 40, PN16/40, flanged connection, DIN. Materials and seals: 1.0619 Steel body; TFM1600 seal (PTFE); Stainless Steel ball. Actuation and features: Electric rotary actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
The Ball Valve DN 40 PN16/40 is a compact shut-off valve designed for safe, rapid and leak-tight operation. Versions: DN 40, PN16/40, flanged connection, DIN. Materials and seals: 1.0619 steel body; TFM1600 seal (PTFE); Stainless Steel ball. Actuation and features: Single-Acting Pneumatic Actuator. Approvals and standards: TA-Luft, Firesafe, ATEX, AD2000-A4. The full or reduced bore allows for rapid switching operations and a tight-sealing shut-off. Suitable for industrial plants, mechanical engineering, water and air lines, process media, and safe shut-off in piping systems.
